What's new
Changes to Quickdraw, newest first. Terms are as defined in the crew manual.
18 November 2026
- New
Crew's Point on the EFB. Send to EFB on a Point Reading adds the point to the Job's KMZ and EFB file, titled with its Walk time (HME56 | Walk 4:37), with | NO LZ added when the Landing Zone does not fit. It replaces any point sent before and stays, on the map too, until Take Off the EFB, another point is sent, or another Job is run.
17 November 2026
- Changed
Measure keeps clear of overhead wires. The unobstructed rectangle keeps clear of overhead wires as a Job does: DNO lines by the user's Power-line Buffer standoff for the band, DNO poles and towers by their footprint, and wires inferred between pylons of the selected map data by the Power-line buffer. Each wire is listed and drawn in purple, on the map, the EFB file and the 3D view. A wire source that could not be read is stated; previously only the LIDAR was considered.
- Changed
Headings are magnetic. Wind direction, Sun and Moon bearings, bearings between places, a recce's slope facing, structure cautions and a measured rectangle's long side are written in degrees magnetic (°M), on the page, in the EFB file and in recce lines sent to HeliGuardian. Variation is the World Magnetic Model 2025 at the place. Barbs and symbols on the map are still drawn on true north.
- Fixed
Structure cautions gave their bearing from grid north, up to about 3° from true north across Great Britain. They are now taken from true north before conversion to magnetic.
- Changed
Measure stays on the map. A measurement remains on the map when Measure is closed, until Clear Measurement in the Measure panel.
- New
Measure on the EFB and in 3D. With a finished Job displayed, a measurement is added to that Job's KMZ, EFB file and 3D view, in the rectangle (Largest / Unobstructed) and units selected. The EFB file is rewritten when the measurement completes, when the rectangle or units change, and when it is cleared.
- Changed
EFB Folders. A Job's EFB files are written to its EFB Folder: the HeliGuardian organisation's, shared by its members, or the user's own (PERSONAL) without a HeliGuardian sign-in. A Job for the organisation is refused if its Callsign is not one of the organisation's aircraft, or if the HeliGuardian session has ended; it is never moved to PERSONAL. Link files downloaded before this change answer This EFB link is retired: download the Callsign's link file again.
- New
Callsign from the organisation's aircraft. Signed in to HeliGuardian, the Callsign on Ready and in Settings is a drop-down of the organisation's aircraft; beside it, a tag names the EFB Folder (the organisation, or PERSONAL). A Callsign not on the list is cleared.
- Changed
Polygons belong to an EFB Folder. The organisation's Polygons are edited by any member and applied to every Job of its aircraft; PERSONAL Polygons apply to the user's own Jobs. Polygons held per Callsign were deleted.
- Changed
A Job replaces any earlier Job for the same Callsign and EFB Folder still running, from any device.
- Changed
REPLACE JOB. While a Job is running, ANALYSE in the incident entry reads REPLACE JOB. Selecting it submits the new Job, stops the running Job (recorded as failed: Replaced by Job …) and writes only the new Job to the EFB. Previously the running Job continued and the new position was not submitted.
- Fixed
A Job completing after a newer Job for the same Callsign could overwrite the newer Job's EFB file. The EFB file now keeps the newest Job submitted; the older Job states that it was not written.
- New
Crew manual rewritten for the current page: Terms, Point Readings, Measure, HeliGuardian Fields and recces, Layouts. Screens and control locations for a phone, an iPad or a laptop, selected at the top of the manual (default: the reading device). Settings › Help › Crew Manual.
- Fixed
A Known Field not offered could take the same map letter as another Known Field, and its line had insufficient contrast in light mode.
- New
Point Readings. Selecting a point inside the radius of a finished Job shows whether the Landing Zone fits there, the Walk time, a Vehicle option where the walk exceeds 500 m, and each finding as a reason chip (e.g. SLOPE, POWER LINE, YOUR POLYGON). On Ready, or with the entry open, a map selection still sets the incident position.
16 November 2026
- New
Measure. For an area drawn on the map: the largest rectangle inside it at any orientation, the LIDAR surface objects of 1 m or more, and the largest rectangle clear of them. Drawing starts when Measure opens.
- New
I Landed Here and recces. Records the landing position (device fix or map selection), lists the Fields within 1 km of it, and opens a recce of a chosen Field or of a new Field created there. Recces are held on the device until HeliGuardian confirms receipt; Send Later and Recces not sent (on Ready) handle those not yet received.
- New
Known Fields during the Job. The Fields in the radius are listed when HeliGuardian answers, before the Job has assessed them. Each opens a screen with all its recces, the newest in full.
- Changed
An offered Known Field is given a Vehicle option (RV, drive, walk) on the same rule as a Candidate Site.
- Changed
“Show all known fields” is on by default for every Job with Known Fields; the EFB file includes them from the first write.
15 November 2026
- New
Day / Night on a finished Job. On completion the Job computes the Candidate Sites in the other clearance mode from the same data; the selector displays either without a new Job. The EFB file, the KMZ and the 3D view follow the mode displayed.
- Changed
ENTER on a complete position submits the Job.
- Changed
iPad held upright: map above, panel below (as on a phone).
- Changed
Open 3D View is a button above the Layers and Job details menu.
- Changed
Create a Field is a control on the Candidate Site screen; Nearby fields need not be opened first.
- Changed
Set as My Default stores the “Add the LIDAR survey” setting.
- Fixed
Sun and Moon symbols overlapped the wind barb and each other. They are placed beyond the barb; the Moon moves outward when within 45° of the Sun.
14 November 2026
- New
Polygon folders, nested to any depth. Folders organise the list only; every Job for the Callsign applies every Polygon.
- New
Create a Field. From a Candidate Site: a check against the Fields HeliGuardian holds within 1 km, then a new Field at the site's centre.
- Fixed
Opening Polygons moved the map.
13 November 2026
- New
Crew manual under Settings › Help.
- Changed
Candidate Site list first. One row per Candidate Site: distance, direction, first caution, Walk time; the row or the map symbol opens the site. Layers, wind and sky moved to the Layers screen.
- Changed
Settings moved behind the gear: Callsign, EFB link file, task defaults, HeliGuardian, Layout.
- Changed
Saved Polygons can be edited (name, rule, active hours); the list shows each Polygon's active hours.
12 November 2026
- New
Layouts. Touch (phone, iPad) and Console (laptop), selected automatically by input device; Settings › Layout overrides.
- New
Ready screen. Sign-in time remaining, server state (checked every 30 s), EFB link file, and the Callsign's last Job from any device.
- New
EFB link file download for the Callsign, from the page.
- Changed
EFB symbols drawn by Quickdraw and centred on their position: numbered disc (Candidate Site), grey square (Locked Candidate Site), magenta diamond (incident), pill (RV).
- Changed
ACANS titles: Candidate Site HME56 | 5, with the Field's recce score in stars where it is a Known Field (HME56 | 5 | ****); incident HME56 Scene.
- Changed
Isles of Scilly: LIDAR terrain from the 2023 survey.
- Changed
Field-edge openings on a walking route are reported as one caution per route.
- Fixed
A walking route could pass through a hedge at the joint between a field boundary and the hedge.
- Fixed
Phone: the entered figures and keys left the screen while typing.
11 November 2026
- Trial
Add the LIDAR survey. When set, the Job adds the hedges, walls, drains and gaps the LIDAR point cloud shows along its walking routes. Off by default.
10 November 2026
- New
3D view of a finished Job in a separate tab: overlay on satellite image, satellite image, or LIDAR point cloud.
- New
Known Fields. Every Job with a HeliGuardian sign-in assesses each Field in the radius and shows the outcome on the map and in the KMZ.
9 November 2026
- New
Incident position entry after sign-in and from New Task: OS grid, DD, DDM or DMS on one keypad, with a 100 km square selector.
- New
Saved defaults (Set as My Default), applied at every sign-in on any device.
- New
HeliGuardian sign-in and Nearby fields (within 1 km) for each Candidate Site.
- Changed
Wales: the Welsh Government LIDAR fills cells the EA survey leaves without a height.